Licensed repiping crews serving Bay County homes and businesses
Pipe Replacement Panama City FL Done Right the First Time
When old galvanized or polybutylene lines start leaking behind your walls, Pipe Replacement Panama City FL is the permanent fix, not another patch. We handle whole home repiping Panama City and single-line swaps for houses from St. Andrews to Callaway, pulling permits, cutting out the failing pipe, and pressure-testing every joint before we close the wall. Same-day estimates, 24/7 emergency response.
Live phone supportUpfront optionsBacked workmanship
What's included
What Is Included in a Pipe Replacement Job
Every repipe we quote covers the pipe, the fittings, the labor, the permit, and the pressure test. We spell out what is included in writing so there is no argument later. Drywall patching and painting are add-ons if you want us to handle them; otherwise we leave clean access holes for your drywall guy.
New PEX or Copper Pipe
We install PEX pipe or copper pipe depending on your home and preference. PEX is faster, cheaper, and handles Panama City's water chemistry well. Copper lasts longer and holds resale value. We quote both and let you pick.
All Fittings and Supply Lines
New pipe fittings, shutoff valves, and supply lines to every fixture are included. We do not reuse old valves or corroded fittings on a new line. Teflon tape and pipe sealant go on every threaded connection, no exceptions.
Permit and Inspection
We pull the Bay County permit and meet the inspector on site. The inspection is part of the job, not an extra. You get the signed-off paperwork for your records and for any future sale or insurance claim.
Full Pressure Test
Before we close a single wall, the new system holds working pressure for at least an hour with a gauge on the main. Any weeping joint gets fixed on the spot. This is the step that catches problems while they are still cheap to fix.
Old Pipe Removal and Cleanup
We haul off every foot of the old pipe and clean the work area before we leave. Drop cloths go down before we cut anything. You should not find metal shavings or drywall dust in your kitchen sink after we are done.
Service overview
What Pipe Replacement Panama City FL Actually Involves
Pipe Replacement Panama City FL means removing failing water supply or drain lines and installing new pipe that meets current Florida code. On a typical job we cut out galvanized steel, polybutylene, or brittle CPVC, then run PEX pipe or copper pipe through the same chases, sweat or crimp every joint, and tie back into fixtures with new supply lines and pipe fittings. A pipe cutter, soldering torch, and PEX crimping tool do the rough work; a pressure gauge confirms the system holds before drywall goes back up.
Most calls we get in Panama City start the same way: a slab leak that keeps coming back, rusty brown water from the tap, or a water bill that jumped $80 in one month. Homes built before 1990 in Bay County often still have original galvanized lines that have corroded from the inside out. If you have been searching Pipe Replacement Panama City FL near me after a second repair on the same run, replacing the pipe beats paying for another patch.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How Our Pipe Replacement Process Works
The process flexes to the condition, but these checkpoints keep decisions clear.
Call and Scope
You call (850) 726-2055 and describe the symptom: low pressure, rusty water, a spike in the bill, or water on the floor. We ask the age of the home and whether the pipe is galvanized, copper, or PEX. Most calls get a same-day window, and emergency calls after a burst pipe get priority dispatch.
On-Site Inspection
A licensed plumber walks the house with a leak detection camera and pressure gauge, checks the water heater connections, and maps every run that needs replacing. We test static pressure at an outside hose bib and inspect the meter for movement with all fixtures off. You get a written scope and a flat price before we cut anything.
Repipe Day
Most whole-home repipes take one to three days. We lay drop cloths, cut access points in drywall or ceiling, and pull the old pipe. New PEX pipe or copper pipe goes in with fresh fittings, and we seal every penetration. Water stays off during the swap, usually four to six hours at a stretch.
Pressure Test
Before any wall goes back, we charge the system and hold it at working pressure for at least an hour. A pressure gauge on the main confirms no drop. If a joint weeps, we fix it on the spot. This is the step that separates a real repipe from a handyman patch job.
Cleanup and Walkthrough
We patch the access holes, haul off the old pipe, and walk the house with you fixture by fixture. You get the permit paperwork, the warranty terms, and our direct number. If anything drips in the first 30 days, we come back at no charge.
Tools & methods
Tools and Methods We Use on Every Repipe
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
PEX Crimping Tool
Makes the copper ring connections on PEX pipe. Every crimp is gauged and inspected. This is the tool that determines whether a PEX joint holds for 50 years or fails in five.
Soldering Torch
Used on copper pipe joints when we repipe in copper. We sweat every joint clean, wipe the flux, and pressure-test before closing the wall.
Leak Detection Camera
Finds hidden leaks behind walls and under slabs without tearing the house apart. We use it during the inspection so the quote reflects what is actually failing.
Sewer Inspection Camera
Checks drain and sewer lines during a repipe scope. If the drain lines are also failing, we tell you before we close the walls so you can decide on one job or two.
Pressure Gauge
Confirms the new system holds working pressure for at least an hour before we close anything up. No gauge test, no sign-off.
Pipe Cutter
Cuts copper and PEX cleanly so fittings seat square. A ragged cut is the number one cause of a weeping joint, and we do not make them.
Use cases
When Pipe Replacement Makes Sense
These examples show how the service framework adapts rather than forcing every call through one repair.
Hiland Park Slab Leak Reroute
A 1985 Hiland Park home with a slab leak that had already been repaired once. The second leak showed up eight months later, and the homeowner did not want another jackhammer in the living room floor. → We rerouted the supply lines overhead through the attic and repiped the affected runs with copper pipe. The slab stayed intact. Water bill dropped $70 the following month, and the floor was never touched.
Panama City Beach Polybutylene Swap
A rental property with polybutylene pipe that the insurance carrier refused to renew. The owner was facing a coverage gap and a tenant who had already complained about weak water pressure. → Full polybutylene replacement with PEX pipe in three days, permit pulled and inspection passed first try. Coverage reinstated with the documentation we provided. Tenant pressure complaints stopped immediately.
Problems we solve
Problems a Repipe Fixes for Good
Most of our repipe calls start with one of these four problems. Each one has a repair option and a replacement option, and we tell you honestly which one makes sense for your house and your budget.
Recurring slab leaks under the foundation
We reroute the supply lines overhead through the attic or walls during a repipe, taking the pipe out of the slab entirely. The next leak, if there ever is one, is visible and cheap to fix instead of a concrete-breaking project.
Rusty brown water from every tap
A whole house repiping Panama City FL job replaces every galvanized run with new PEX or copper. The brown water stops the day the new line goes in, and you stop wondering what is coming out of the tap.
Water pressure that drops when two fixtures run
New pipe restores full flow at every fixture. We size the new lines to the fixture count so a shower and a dishwasher can run at the same time without either one starving.
Polybutylene pipe in a 1980s or 1990s home
We replace every foot of polybutylene with PEX pipe and document the swap with permits and photos. That documentation clears the insurance hurdle and the inspection flag in one job.
Pricing process
What Pipe Replacement Costs in Panama City
$600 - $12,000 depending on scope
Home size and fixture count
A 1,200 square foot home with one bath is a smaller job than a 2,800 square foot home with three baths and a kitchen island. More fixtures means more supply lines, more shutoff valves, and more time on the crimping tool.
Pipe material: PEX vs copper
PEX pipe costs less in material and labor and is the common choice for repipes. Copper pipe costs more but lasts longer and holds resale value. We quote both so you can weigh the trade-off.
Slab reroute vs in-slab replacement
Rerouting supply lines overhead through the attic avoids breaking the slab and usually costs less than a full under-slab replacement once you factor in concrete repair and flooring.
Customer reviews
What Panama City Customers Say
★★★★★
“Our 1958 house had galvanized pipe everywhere and we were patching leaks every few months. The crew repiped the whole place in two days with PEX and rerouted the slab lines overhead. Water pressure at the shower is night and day. They patched the drywall clean and hauled off every bit of the old pipe. Worth every dollar.”
★★★★★
“We had a slab leak that had already been repaired once and came back six months later. Emergency Plumbing Pro found it with the camera, showed me the corroded section on the screen, and quoted a repipe instead of another patch. Three days later the job was done and the water bill dropped $70 the next month. No surprises on the price.”
★★★★★
“I manage six rentals in Bay County and use these guys for everything. They repiped a duplex in Callaway last spring, pulled the permit, passed inspection first try, and left the units rent-ready. Tenants never complained about the water being off too long. That is rare. I have not called another plumber since.”
How much does Pipe Replacement cost in Panama City FL?
Most whole-home repipes in Panama City run $4,500 to $12,000 in 2026, depending on square footage, pipe material, and how many fixtures need new supply lines. A single-run replacement is usually $600 to $1,800. Slab reroutes, second-story access, and copper instead of PEX push the number up. We give you a flat written price after the on-site inspection, so you know the total before we start.
Who does repiping near me in Panama City?
Emergency Plumbing Pro has handled repiping in Panama City since 1928. We are a state-licensed plumbing contractor with Master Plumber and Journeyman Plumber License holders on staff, and we pull permits through Bay County on every repipe. Call (850) 726-2055 and we will schedule a same-day or next-day inspection, depending on how urgent the leak is.
How long does Pipe Replacement take in Panama City Florida?
A whole-home repipe typically takes one to three days for an average 1,500 to 2,200 square foot home. Single-line replacements finish in two to five hours. Water is off in four to six hour blocks during the swap, and we schedule those windows around your morning routine. Drywall patching may add a day if you want us to handle it.
What are signs I need Pipe Replacement in Panama City FL?
The big four: rusty or discolored water from the tap, water pressure that drops when two fixtures run at once, a water bill that jumped without a change in usage, and a slab leak that has already been repaired once. If your home was built before 1990 and still has galvanized or polybutylene pipe, a repipe is usually cheaper than another round of patches.
Related services
Other Services We Handle
Emergency Plumbing Services
When a pipe bursts at 2 a.m., our emergency crew shuts off the water and stabilizes the line before we schedule the full Pipe Replacement Panama City FL job. Same number, same crew, no after-hours surcharge games.
Plumbing Repairs
Not every leak needs a full repipe. We repair leaking faucets, running toilets, and failed supply lines, and we tell you honestly when a repair will hold and when replacement is the smarter spend for your Panama City home.
Drain Cleaning
A clogged drain and a failing drain line look similar until we run a sewer inspection camera. If the pipe is intact, a drain snake or hydro jetter clears the blockage. If it is cracked or collapsed, we quote replacement.Ready when you are
Get Your Pipe Replacement Panama City FL Quote Today
Licensed, insured, and 98 years in Bay County. Call (850) 726-2055 and we will schedule a same-day or next-day inspection, give you a flat written price, and get your repipe on the calendar. Emergency calls answered 24/7.
Talk with the local team
Request Pipe Replacement
Call (850) 726-2055 any time, day or night. A live dispatcher takes your address, the problem and any access details, then sends the closest tech. Standard appointments run Monday through Friday, 8 a.m. to 6 p.m., and emergency service is always open. You can also email info@emergencyplumbingpro.com for non-urgent scheduling.