Licensed plumbers for kitchen and bath sinks across Bay County
Sink Installation and Repair Panama City FL done right the first time
When your sink leaks, clogs, or finally gives out, our team handles Sink Installation and Repair Panama City FL homeowners can count on. We install kitchen and bathroom sinks, swap out failing basins, and track down leaks behind the wall before they rot the cabinet. Same-day service, upfront pricing, and a workmanship warranty on every job we finish in Panama City, Florida.
Live phone supportUpfront optionsBacked workmanship
What's included
What is included in a sink service call
Every sink job is different, but here is what our standard service covers. If something is not on this list, we quote it separately and you decide before we touch a tool.
Old sink removal
We disconnect the supply lines, cut the drain loose, and lift out the old basin without cracking the countertop. The old sink goes on our truck and gets hauled off, so you are not stuck with it in the garage.
New sink installation
We set the new basin with fresh plumber's putty or silicone, align the drain, and secure it to the counter or cabinet. Undermount, drop-in, and farmhouse styles all get set to the manufacturer's spec.
Drain and supply rebuild
New P-trap, new supply lines, and fresh pipe fittings come standard. We check the shutoff valves and replace any that are seized or weeping while the cabinet is open.
Faucet and disposal hookup
If you are keeping the faucet, we reconnect it. If you bought a new one, we install it. Same with the garbage disposal: we wire it, seal it, and test it before we leave.
Pressure test and cleanup
We fill the basin, run hot and cold, and watch every joint for leaks. Then we dry the cabinet, wipe the counter, and walk you through the work and the warranty.
Service overview
What Sink Installation and Repair Panama City FL covers
Sink Installation and Repair Panama City FL is the licensed trade work of removing, replacing, or rebuilding the sink assembly in your kitchen or bathroom, including the basin, faucet, drain assembly, P-trap, supply lines, and the shutoff valves feeding it. A full job means cutting out the old unit, checking the cabinet floor for water damage, setting the new sink with fresh plumber's putty or silicone, and pressure-testing every connection before we pack up. Most single-basin swaps take two to four hours.
In Panama City, sink problems rarely arrive alone. The humidity off St. Andrews Bay rusts out steel supply lines, and older homes near the 32401 and 32405 ZIP codes still run galvanized pipe that scales up and chokes flow. We see kitchen sink repair Panama City calls spike after holiday cooking, when a clogged drain finally backs up into a full basin. If you need a sink replacement service in Panama City Florida, we can usually get eyes on it the same day you call.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How our sink service works
The process flexes to the condition, but these checkpoints keep decisions clear.
Call and book
You call (850) 726-2055 or book online. We ask what the sink is doing, what kind it is, and whether water is actively leaking. That tells us what to load on the truck. Most Panama City jobs get a same-day or next-morning slot.
On-site diagnosis
A licensed plumber arrives, shuts off the supply, and pulls everything out of the cabinet. We check the P-trap, the supply lines, the shutoffs, and the cabinet floor for rot. If the drain line is the real problem, we tell you that before quoting sink work.
Written price, your call
You get a flat price for the repair or replacement before any work starts. If we find a slab leak or a corroded drain line behind the wall, we show you and quote that separately. You decide what gets done today.
Install or repair
We cut out the old sink, set the new one, and rebuild the drain with fresh pipe fittings, Teflon tape, and pipe sealant. Faucet, disposal, and supply lines get connected and torqued to spec. A standard swap takes two to four hours.
Test and clean up
We fill the basin, run the disposal, and watch every joint under pressure for ten minutes. Then we wipe down the cabinet, haul off the old sink, and walk you through what we did. You get a workmanship warranty on the install.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Pipe wrench and basin wrench
For loosening supply nuts, P-trap fittings, and faucet mounting nuts in tight cabinet spaces where a regular wrench will not reach.
Drain snake and hydro jetter
For clearing clogs in the sink branch line and the main drain. The snake handles most household clogs; the hydro jetter scours grease and scale from the pipe walls.
Leak detection camera and sewer inspection camera
For finding hidden leaks behind walls and checking drain lines for cracks, root intrusion, or bellies before we quote a repair.
PEX crimping tool and pipe cutter
For making clean, code-compliant PEX and copper connections on supply lines. A square cut and a proper crimp are what keep a joint from weeping.
Pressure gauge
For testing supply pressure after an install and confirming the new connections hold under normal household pressure before we call the job done.
Soldering torch
For copper pipe work where a soldered joint is the right call. Used on older homes with copper supply lines that need a section replaced.
Use cases
When to call us for sink work
These examples show how the service framework adapts rather than forcing every call through one repair.
Under-sink leak in a Lynn Haven rental
A tenant reported water pooling under the bathroom sink. The supply line had been weeping for weeks, and the cabinet floor was stained and starting to swell at the edges. → We replaced both supply lines, swapped the shutoff valves, and reseated the drain with fresh plumber's putty. The cabinet dried out over three days and the swelling stopped. Total job time was about 90 minutes.
Kitchen remodel sink swap in Hiland Park
Homeowners were mid-remodel and needed the old drop-in sink replaced with an undermount basin to match a new countertop. The old drain was undersized and the disposal was on its last legs. → We set the new undermount sink, rebuilt the drain with the correct P-trap depth, and installed a new disposal. The counter cut matched the new basin, and the whole job was done in under four hours.
Problems we solve
Sink problems we fix across Panama City
Most sink calls fall into a handful of categories. Here is what we see most often and what happens if you let it ride.
Leaking supply line under the cabinet
We shut off the supply, replace the failed line with a braided stainless or PEX line, and check the shutoff valve while we are in there. Most of these are done in under an hour.
Clogged drain that keeps coming back
We run a drain snake or hydro jetter through the branch line to clear the full run, then camera it if the clog keeps returning. That gets you a drain that stays clear.
Cracked or rusted-out basin
We pull the old basin, inspect the cabinet and counter for damage, and install a new sink with fresh drain and supply connections. Two to four hours, start to finish.
Low water pressure at the faucet
We pull the aerator, flush the line, and check the shutoff and supply for scale. If the issue is in the pipe itself, we scope it and quote a repair.
Pricing process
What sink work costs in Panama City
$150 - $850 depending on scope
Sink type and size
A standard drop-in bathroom sink is the simplest job. Undermount, farmhouse, and custom-cut kitchen sinks take longer and cost more because of the mounting and sealing work involved.
Faucet and disposal
If you are keeping the existing faucet and disposal, the price stays lower. New fixtures add parts cost and install time, and we quote those separately so you can decide.
Drain and supply condition
Seized shutoffs, corroded supply lines, and cracked P-traps all add time. We replace them while the cabinet is open rather than leaving a weak point behind the new sink.
Customer reviews
What Panama City customers say
★★★★★
“Our kitchen sink had been draining slow for months and then backed up on a Sunday. They came out that afternoon, snaked the line, and found the P-trap was cracked. Replaced it and the supply lines for a fair price. Cleaned up better than they found it.”
★★★★★
“We had a 1950s house with the original cast iron drain and a rusted-out sink. They walked me through the options, replaced the sink and the drain section, and it has not leaked once. The plumber explained everything without talking down to me.”
★★★★★
“I manage a few rentals and need sink work done fast between tenants. Called on a Tuesday, had a new bathroom sink installed by Wednesday afternoon. Price was exactly what they quoted. I have used them three times since.”
How much does Sink Installation and Repair cost in Panama City FL?
Most sink repairs run $150 to $350, and a full sink replacement typically lands between $300 and $850 depending on the basin and whether we replace the faucet and disposal. Simple cartridge swaps and P-trap replacements sit at the low end. Custom undermount installs with new countertop cuts sit at the high end. You get the exact number before we start.
Who does sink replacement near me in Panama City?
We do. Emergency Plumbing Pro handles sink replacement across Panama City, Lynn Haven, Callaway, Springfield, and the beach communities. Call (850) 726-2055 and we will get a licensed plumber to your kitchen, usually the same day. We bring the new sink, the drain parts, and the tools in one trip.
How long does Sink Installation and Repair take in Panama City Florida?
A standard kitchen or bathroom sink swap takes two to four hours from arrival to cleanup. A repair like a new P-trap or faucet cartridge runs 45 to 90 minutes. If we find a slab leak or a corroded drain line behind the wall, that becomes a separate job and we tell you before we go further.
Can you fix a leaking sink in Panama City FL?
Yes, and we do it every week. Most under-sink leaks come from a failed supply line, a loose compression fitting, or a cracked P-trap, and all three are quick fixes with the parts we carry. We shut off the water, find the source, replace the failed piece, and pressure-test the whole assembly before we leave.
Related services
Related Services
Emergency Plumbing Services
A sink that will not shut off is an emergency. Our 24/7 crew handles burst supply lines, overflowing basins, and shutoff valves that snap off in your hand, anywhere in Panama City and Bay County.
Plumbing Repairs
Sink problems often trace back to the wider system. We repair failing shutoffs, corroded nipples, and worn supply lines so the next sink install has solid plumbing to connect to.
Drain Cleaning
If your sink drains slow after the new install, the clog is in the branch line, not the sink. We clear kitchen and bath drains with a drain snake or hydro jetter and restore full flow.Ready when you are
Book Sink Installation and Repair Panama City FL today
Leaking, clogged, or cracked sink? We can usually be there the same day. Call (850) 726-2055 and talk to a real plumber, not a call center. Upfront pricing, licensed work, and a warranty on every install we finish in Bay County.
Talk with the local team
Request Sink Installation and Repair
Call (850) 726-2055 any time, day or night. A live dispatcher takes your address, the problem and any access details, then sends the closest tech. Standard appointments run Monday through Friday, 8 a.m. to 6 p.m., and emergency service is always open. You can also email info@emergencyplumbingpro.com for non-urgent scheduling.